Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Other
Includes all hydraulic seals to perform a complete cartridge rebuild of your BikeYoke dropper post.
Compatible with: DIVINE SL and DIVINE SL RASCAL
Service kit for 100 hour service (readjusting play and replacing wiper).
Kit includes:
- 1x Wiper
- 6x Glide pin
- 1x Lower bushing
- 1x Foam ring
- 1x C-clip
- 1x Upper bushing
Service kit for 100 hr service (re-adjusting play and replacing wiper).
There are three different service kits for the REVIVE/DIVINE 30.9/31.6, depending on model year and version.
To determine the correct service kit for your post, please copy this link into your web browser:
https://www.bikeyoke.de/media/products/REVIVE%20service%20kit%20coding.pdf
Kit includes:
- 1x Wiper (with spring)
- 6x Glide pin
- 1x Lower bushing (grey, with line marking)
- 1x Foam ring
- 1x C-clip R12
BikeYoke Sanguine is designed specifically for the use in BikeYoke seat posts.
The formula reduces friction, ensuring fast action with minimal drag even in low winter temperatures below 0°C. Special additives help keep your post's o-rings and seals smooth and reduce wear.
- Suitable for all BikeYoke dropper posts
- Size: 250ml (lasts for several full services)
Valve-extension-adapter.
Allows easier access to your dropper valve for shock-pumps with short valve heads.
This BikeYoke allows the use of a standard shock in your Specialized bike.
Stumpjumper 2016-2018
Turbo Levo 2016-2018
Includes:
- 1x BikeYoke SJ02
- 1x DU bushing
- 1x reducer
- 1x stainless steel bolt
Pre-tension Bolt for Shimano Hollowtech II Cranks and Shimano E-bike motors.
Simplify things with an 8mm fitting and add a splash of your favourite anodised color. Never worry about turning the garage upside down at midnight to find that little 'thingy' to pre tension your cranks ever again.
- Remember this product needs minimal torque and do not exceed the manufacturers maximum recommended torque 0.7 to 1.5Nm
- Suits: XTR, XT, SLX, LX, Deore, Saint & Zee cranks and bikes with a Shimano e-bike motor.
Campagnolo Ultra Torque Cup and Bearing Kits. Includes 2 bearings and 2 seals.
- Kit includes 2 bearings and 2 seals
CNC machined from 6061 T6511 aluminum. Machined surfaces allow for better caliper alignment and a more rigid brake setup.
The Post Mount standard is universal to front and rear brakes.
Frames and forks that use the post mount brake interface use a stock size that varies from 160mm - 203mm. It’s important to check your frame and fork for the default post mount size before ordering a suitable adapter.
To calculate the size of the required adapter, subtract the frame/fork stock mount size from the desired rotor size.
- Replacement chain pins for Shimano 11-speed chains
- Compatible with CN7900/7801 chains
- 3 pins per pack
Shimano Deore XT M8000 Rear Derailleur Bracket Axle Unit
- "B" fit for SLX RD-M7000-11
Shimano Deore XT M8000-GS Rear Derailleur Cage Plate
If you put in a lot of miles and/or sweat a lot, your shifter hoods probably need freshening up. Grab a pair of Shimano Dura-Ace STI Lever Hoods to make your bike feel new again.
- Fits Dura-Ace 9001 STI levers
- Black carbon fiber weave headset spacers for tuning ride height - No logos - Includes five (5) 1-1/8" x 2.5mm spacers
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- CNC machined 6061 aluminum
- Black anodized finish
- Made in the USA
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399)
- CNC machined 6061 aluminum
- Made in the USA
Loose ball bearings in bags or bottles.
- Replacement loose ball bearings
$0.16
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss 240s Shim Ring
$0.16
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings
$0.90
Replacement small parts for Hope disc brake Hope disc brake calipers.
$0.90
Steel 1mm spacer fits Shimano cassette bodies
- Great for 10 sp cass on 8/9 sp hubs
- Also for many other fit applications
$0.99
Internally fitting service parts for Hayes hydraulic disc brake master cylinders.
- All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).
$1.00
Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further.
- M4 x 24mm screw for that extra little push
Page 1 of 76
Next page