Filter By:
- 24-Inch & Smaller (41)
- 26-Inch (60)
- 650B (108)
- 29-Inch (121)
- 700c, 27-Inch & 650c (214)
- Fat Bike (4)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Wheels

$109.99
The Rampage rear wheel rolls on a four-bearing sealed cassette hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 9T chromoly driver with 3-pawl system.
- Axle: 14mm chromoly
- Driver: 1-pc chromoly RHD, 9T
- Driver Bearings: 6802 (x2), verify bearing number on side of rubber seal
- Driver Pawls: 3 Pawl
- Driver Spring: Wraparound (x1)
- Hardware: Steel (17mm wheel nuts)
- Hub Shell Bearings: 6902 (x2) verify bearing number on side of rubber seal
- Drilling: 36H

$79.99
The Rampage 22-inch front wheel features a sealed front hub with a 3/8" chromoly axle and is laced to a Rampage double-wall rim. It's designed for BMX 100mm wide forks.
- Axle: 3/8-inch chromoly
- Hardware: Steel (17mm wheel nuts)
- Hub shell bearings: 6000 (x2) verify bearing number on side of rubber seal
- Drilling: 36H
- PVC rim strip included

$179.00
Own the same "Lo-Pro" Wheel set featured on State's Retro Reissue Series Bicycle Line.
- Low Profile Flat Rim
- 700c x 32H rim
- Flip / Flop Hub
- Weight: 922g - Front / 1133g - Rear
- 2lb 3oz front, 2lb 8oz rear

$210.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles.
With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use.
“The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.”
Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch.
All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost.
The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes.
Arch S1 Wheelset
- Use: Trail and Enduro
- Internal Rim Width: 26mm
- Optimal Tire Size: 2.25 to 2.5-inch
- Hubs: Stan’s Neo 32-hole Front, 32-hole Rear
- Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples
- Wheel Sizes and Weights: 27.5-inch (1,882g) and 29-inch (1,974g)

$289.00
Stan's S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles.
With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan's successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use.
"The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years," said Creative Director, Chris Currie. "The goal was to take everything we've done for tubeless technology, and put it into a truly bombproof and affordable wheel."
Designed according to Stan's WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan's low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch.
All S1 wheelsets are built with 32 spokes front and rear, Sapim's proven Race spokes, Secure Lock brass nipples, and Stan's faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost.
Flow S1 Wheelset
- Use: Aggressive Trail, All Mountain, Enduro, and Downhill
- Internal Rim Width: 29mm
- Optimal Tires Size: 2.35 to 2.8-inch
- Hubs: Stan's Neo 32-hole Front, 32-hole Rear
- Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples
- Weight: 2134g

$61.00
Sta-Tru Wheels TR21V tubeless-ready double-wall rims
- Hybrid rim with an attractive rim profile developed for Sta-TruWheels, Inc
- KT ATB 9mm/100/108 axle hub
- Silver UCP spokes

$69.00
The best price on the market for a wheel meant to be ridden. Single-wall rims and loose-ball hubs that come out of the box round and true.

$79.00
The best price on the market for a wheel meant to be ridden. Single-wall rims and loose-ball hubs that come out of the box round and true.

$89.00
The best price on the market for a wheel meant to be ridden. Single-wall rims and hubs that come out of the box round and true.
- 25mm external rim width

$79.00
The best price on the market for a wheel meant to be ridden. Single-wall rims and hubs that come out of the box round and true.

$89.00
The best price on the market for a wheel meant to be ridden. Single-wall rims and hubs that come out of the box round and true.

$78.00
Double-wall rims, Shimano hubs, DT-Swiss spokes and nipples - all at competitive pricing. These all-black wheels are the new standards in repair staples.

$25.00
MICHELIN's Country Race'R is the perfect choice for hardpack surfaces and fast courses. It has shorter knobs in the center so it rolls fast, taller knobs on the sides that great grip in the corners and it's built for excellent durability and puncture resistance too.

$175.00 - $195.00
- Disc brake only
- Thru Axle sealed bearing hubs
- 30mm Tubeless Ready rim
- Does not include axles, tape, or tubeless components

$2,550.00
What It Is
A purpose-built XC wheelset without limitations. Light enough to race, strong enough to ride daily. Reduced fatigue and a more compliant ride through shape, laminate, and spoke-hole optimization.
Who It's For
Modern XC racers and riders who demand equal uphill and downhill performance, light weight, durability, and vertical compliance for long hours in the saddle.
Why We Made It
Carbon fiber is responsible for unlocking the potential of bigger and wider tires on mountain bikes. Today, riders can improve comfort, efficiency, and control by adapting their mountain bikes perfectly for the terrain and trails. Undoubtedly, this means they can go further and faster with more confidence. Complement increased tire volumes and rim widths with a modern XC tread, and you've got an effective system, maximized for the variable-pitch trail. The result is a purpose-built full-carbon fiber XC wheelset that is lighter, wider, and more vertically compliant without sacrificing strength or reliability. Additionally, the M525 features ENVE's patent pending, wide hookless beads that improve pinch flat resistance and allow riders to run modern lightweight XC tires with a reduced risk of pinch flatting or impact damage.

$213.90
When heavy duty riding is your passion, the C 1800 is the right partner fro any mission. It is right at home at anything from jumping obstacles, cutting through mud and sprinting up steeps. Trademark DT Swiss reliability coming from precision hubs, sturdy bladed spokes and superb wheel build guarantee trouble free rides.
- Spline hub
- Straight-pull hub and spokes are laced 2-cross
- Includes tubeless ready tape and tubeless valve

$265.90 - $303.90
Nowadays, bikers ride what used to be called downhill trails on enduro bikes. The trails are getting rougher, and the demands on the gear and rider are greater. The E 1900 SPLINE has been developed to deal with precisely these requirements. With its stiff aluminum rim, lightweight straight-pull spokes, and proven DT Swiss hubs, this wheel is well-prepared for any challenge. The balance of weight and stiffness will put a smile on your face whether you're riding uphill or downhill. After all, most of the best trails don't offer lift service.

$262.00 - $302.00
Mountain biking has always progressed, and the M 1900 SPLINE 30 is part of its progression. With today's breed of super capable trail bikes, wheels need to be up to the speed and terrain these bikes are capable of. DT developed the M 1900 30 just for these demands. With a highly resistant rim material and profile, and industry leading spoke and wheel building quality, it is more than ready to take up some wide rubber and dominate the mountain, no matter how big or rocky it may be.

$404.90
Comfort joins speed. PR 1600 wheels work perfectly with wider tires, which results in more comfort in the saddle and more grip on the road. These wheels excel on any terrain, transfer every bit of energy into forward momentum and take every corner with Swiss precision.
- 350 based Spline hub with 18t ratchet system
- Straight-pull hub and spokes are laced 2-cross
- Includes steel RWS skewer, tubeless ready tape and tubeless valve

$359.00 - $359.99
Control and stability for enduro riding.
Details
- Wheels sold individually not in sets.
- Tuned Front and Rear Alloy Wheel System for enduro riding and racing.
- Front- and rear-specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding.
- Compliant tuned front wheel improves handling and maximizes grip and control in turns. Wider inner rim width supports wider tire profile in front, increased volume and contact patch, and rounds tire profile to enhance turning.
- Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed. Narrower inner rim width supports narrower tire profile in rear, improves rolling resistance, and sharpens tire edge for grip.
- Welded and sleeved rim joint for additional strength.

$249.95 - $399.95
Lightweight, yet tough wheels with Pimplite hubs and 28mm Pimplite rims
- All black with gold Torque nipples (an oversized alloy nipple offering the strength of a brass nipple while saving 20g per wheel, plus more pivot range at the spoke hole for reduced stress on spoke)
- Front: 20mm thru-axle, adapters sold separately
- Rear: 12 x 135mm thru-axle and accepts an 8–11-speed cassette or 10 x 135mm bolt-on for single-speed use
- Accepts Pimplite HG-splined cassette or Pimplite micro-cassette single-speed
- All have 6-bolt disc mount and Atomlab rim strips

$159.95 - $214.95
- Hand built with precision Pimp or Pimplite hubs and 28mm Standard Issue rims - *Front Pimplite 20mm thru-axle hub can be fit to 9mm QR and 15mm thru-axle forks using adapters (sold separately) - Standard diameter brass nipples (not Torque nipples) -

$897.00
Zipp's 101 XPLR is a purpose-built wheel for gravel. Thanks to MOTO Technology, this wheel arms gravel cyclists with more control and durability over harsh terrain, providing a smooth ride quality that helps reduce fatigue. That means a more comfortable ride. The 101 XPLR—short for explore-is purpose—built for riders searching for adventure beyond the norm. Think of it as a magic carpet ride over primitive roads, especially with large tubeless tires at lower tire pressures. This wheel is ideal for gravel racing, adventure, or any long day in the saddle. Based on Zipp's MOTO Technology, the 101 XPRL's single-wall rim construction provides excellent compliance and vibration damping. Less fatigue, allows you to ride longer and faster. The 101 XPLR features the ZR1 hubset for better seal design for improved durability and quicker response with 66 points of engagement. With 101 XPLR, victory is in the pursuit of adventure.
- All-day comfort and compliant ride
- Available in 700c or 650b
- 27mm wide internal profile
- Reduced chance of pinch flatting
- More traction in rough corners
- Smoother ride in rocky terrain
- Ability to run lower tire pressure
- Less fatigue, which allows you to ride longer and faster
- Frustration-free tire installation
- ZR1 hubset for better seal design for improved durability and quicker response with 66 points of engagement
- Lifetime Warranty

$1,002.00
Zipp's 101 XPLR is a purpose-built wheel for gravel. Thanks to MOTO Technology, this wheel arms gravel cyclists with more control and durability over harsh terrain, providing a smooth ride quality that helps reduce fatigue. That means a more comfortable ride. The 101 XPLR—short for explore—is purpose-built for riders searching for adventure beyond the norm. Think of it as a magic carpet ride over primitive roads, especially with large tubeless tires at lower tire pressures. This wheel is ideal for gravel racing, adventure, or any long day in the saddle. Based on Zipp's MOTO Technology, the 101 XPRL's single-wall rim construction provides excellent compliance and vibration damping. Less fatigue, allows you to ride longer and faster. The 101 XPLR features the ZR1 hubset for better seal design for improved durability and quicker response with 66 points of engagement. With 101 XPLR, victory is in the pursuit of adventure.
- All-day comfort and compliant ride
- Available in 700c or 650b
- 27mm wide internal profile
- Reduced chance of pinch flatting
- More traction in rough corners
- Smoother ride in rocky terrain
- Ability to run lower tire pressure
- Less fatigue, which allows you to ride longer and faster
- Frustration-free tire installation
- ZR1 hubset for better seal design for improved durability and quicker response with 66 points of engagement
- Lifetime Warranty

$1,350.00
Road bikes are going where they’ve never gone before, are expected to do more, and are being ridden harder than ever. At the same time disc brakes are rewriting the rules of what’s possible with rim design. For this new era, the Zipp 303 Firecrest Tubeless Disc-brake wheelset sets the new standard. With a disc-specific, tubeless rim, the 303 Firecrest Carbon Clincher is now internally 21mm wide and faster than ever. Designed from the start as a tubeless rim, the 303 Firecrest features a rim bed made with internal ridges to lock the tire’s bead in place, ensuring secure performance, even when ridden at lower tire pressures. A new carbon fiber layup keeps weight low while maintaining the 303’s legendary durability. The rim’s lightweight design allows the 303 to glide up the steepest climbs while SRAM's robust 77/177D hubset keep the wheels stiff and responsive.
Each Wheel Includes:
- Zipp Tubeless valve extender and valve-core wrench
- Zipp rim tape (factory taped)
- Zipp Tangente quick-release skewer
- Zipp thru-axle end caps

$1,453.00
The definition of "road cycling" now includes gravel and dirt as well as pavement. At the same time, bikes are evolving to meet the fit requirements of smaller riders. Meeting these two distinct needs was the driving force behind the Zipp 303 Firecrest 650B Tubeless Disc-brake wheelset. The smaller rim size provides room within frames and forks for larger tires that deliver increased comfort, compliance, and cornering performance. With more tire between the rim and the ground, the overall wheel diameter, including the tire, is similar to a standard 700c wheel and road tire combination. Back on the pavement, the 650B is a better-fitting wheel for smaller athletes riding compatible frames. For too long, many smaller cyclists have trained and raced on standard 700c wheels, losing out on the advantages of a proper fitting wheel such as improved handling and the elimination of front wheel-toe overlap. At the center of the 303 650B Firecrest Tubeless is a versatile and durable hubset, the German-engineered ZR1 DB.
- Zipp graphics and cosmetic identity that scream speed
- Versatile 45mm rim profile for increased speed and better cornering, control, and comfort
- Tubeless design provides secure performance when ridden at lower tire pressures
- ZR1 DB hubset is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement
- Built with Sapim CX Sprint J-bend spokes
- Center Lock rotor interface (lockring included)
- Ships with 12mm end caps

$1,050.00
Zipp's 303 Firecrest Tubeless wheels are designed for the real world—a world of imperfect conditions, varying road surfaces, and elements where the bottom line is simple: efficiency = speed. They're faster, lighter, and more capable over varied terrain—whether the surface is pavement in all its conditions or no pavement at all.
Deeply rooted in Zipp's drive to conquer the Spring Classics, the new 303 Firecrest is remade with a purpose-made approach for the demands of modern road bikes. When it comes to going fast on a bicycle, efficiency means reduced wind resistance, rolling resistance, rider fatigue, and weight. The 303 Firecrest Tubeless Disc-brake was designed using real-world direct measurements (vs. primarily wind tunnel or computer simulation). The results were huge. Its rim is slightly more bulbous in design than its predecessor, with a 32mm outside width, a 25mm internal width, and a 40mm rim depth. The profile provides low drag and an improved transition between rim and tire, boosting aero efficiency on the road. The wide rim stance also features less tire deflection for reduced rolling resistance. The combination of the wider tire, increased tire volume, and lower tire pressure helps to reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions—the tire and wheel system absorbs the shaking, not the rider. At the center of the 303 Firecrest Tubeless is a versatile and durable new hubset, the German-engineered ZR1 DB. This hubset features 66 points of engagement for quicker response.
The 303 Firecrest Tubeless wheels are for dedicated cyclists who aspire to the latest in technology. They're for those who compete in races, against peers, or simply to conquer personal limits.
- New Zipp graphics and cosmetic identity that scream speed
- Versatile endurance wheelset for the modern road bike with tubeless and hookless rim profile
- Lighter weight than its predecessor, making it nimble and fast
- Tubeless Made Easy, optimized tire bed sign allows for simple tool-free installation and removal with no need for an air compressor to seat the tire.
- Ultra-wide 25mm rim profile creates a better tire interface to be fast on or off the road
- 40mm rim depth makes a light and aero wheel in every situation
- Ships with 12mm end caps
- Center Lock rotor interface (lockring included)
Page 1 of 18
Next page