Filter By:
- Bar Ends (20)
- BMX (81)
- Bottom Brackets (271)
- Brakes/Levers/Pads (854)
- Cables (266)
- Cassettes/Freewheels (182)
- Chainrings (365)
- Chains (177)
- Show More Categories
- Cranksets (362)
- Derailleurs (216)
- Forks (221)
- Groups (33)
- Handlebar Grips/Tape (531)
- Handlebars (360)
- Headsets (220)
- Pedals (508)
- Saddles (519)
- Seatposts (152)
- Shift/Brake Combinations (81)
- Shifters (153)
- Shocks (37)
- Stems (214)
- Other (2687)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts

$16.50
iSSi's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered.
- 4 degrees of float both inward and outward

$65.00
The Flash I is iSSi's minimalist take on the traditional two-sided clipless pedal. It performs as well on the trail as it does on the commute.
- Double bushing spindle, 52.5mm
- Smooth-rolling at an affordable pricepoint
- SPD-compatible cleats and mounting hardware included

$85.00 - $90.00
The Flash is iSSi's minimalist take on the traditional two-sided clipless pedal. It performs as well on the trail as it does on the commute.
- Bushing / Sealed bearing spindle, 52.5mm
- Models with longer spindles available in BlackOut
- SPD-compatible cleats and mounting hardware included

$105.00 - $120.00
The Flash is iSSi's minimalist take on the traditional two-sided clipless pedal. It performs as well on the trail as it does on the commute. Three sealed cartridge bearings make the Flash III iSSi’s smoothest rolling, most durable, lightest clipless pedals with multiple spindle length options.
- Spindle Type: Flip III: Triple Bearing
- Smooth-rolling at an affordable pricepoint
- SPD-compatible cleats and mounting hardware included

$24.99 - $25.00
The split-cleat system makes cleat swapping a snap – no need to worry about losing your cleat’s position.
- Cleat Bolt Pattern: 3-Bolt
- Cleat Compatibility: Pedal iSSi , Look KeO
- Cleat bolts and washers included
- 4mm hex wrench required to install

$100.00
The iSSi Road Carbon Pedals provide large platforms for excellent power transfer and stability. Bushing and sealed cartridge bearings add durability, while the Chromoly spindles resist corrosion for long life.
- Simple installation with a 8mm hex key
- Stainless Steel cleat plate provides a solid pedal interface
- Adjustable spring tension
- 7° float, 3-bolt split-cleat included
- Cleat Interface: Look KeO
- Material: Carbon
- Pedal Body Material: Aluminum
- Pedal Spindle: 9/16-inch
- Pedal Type: Single-Sided Clipless
- Spindle Material: Chromoly steel
- Weight: 266 grams
$40.00
The concave shape and tall pins of the Thump composite pedal provides a "just-right" amount of traction—enough for the rigors of riding off-road—but with nylon pins to keep calves laceration-free on more casual rides. Two different platform sizes accommodate feet from small to Sasquatch.
- Tough nylon composite body
- Chromoly spindles, sealed cartridge bearings, and nylon bushings
- Body: 18.5mm thick with 2.5mm of concavity for great control and pedal feel
- Platform size: 119 x 99mm

$50.00
Built to handle the rigors of riding off-road, the concave shape and tall pins of the Thump composite pedal provide the perfect balance of traction and comfort for a range of applications. The Thump RP version comes with replaceable steel pins that provide solid traction when the trail gets hairy. Two different platform diameters accommodate a range of shoes sizes for a more personalized fit.
- Tough, nylon composite body
- Chromoly spindles, sealed cartridge bearings, and nylon bushings
- Body: 18.5mm thick with 2.5mm of concavity for great control and comfort
- Pin height: 3mm out of the box. Remove the 2mm washer under the pin head to convert to 5mm pin height.
- Platform size: 119 x 99mm

$74.99 - $78.99
absoluteBLACK Oval 104/64 BCD Chainrings greatly improve traction and climbing abilities. They are designed for use with all cranksets with a 104/64 BCD interface, including Shimano, SRAM, Race Face, FSA, and more. These chainrings allow you to run a 1x system without chain retention issues. The specially designed narrow-wide tooth profile keeps the chain snug, allowing you to leave your chain keeper in the garage. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center).
- Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding
- The unique, patent-pending narrow-wide tooth profile keeps the chain in place
- Teeth have been 3D-machined for ultimate mud shedding and quieter operation
- Provides excellent weight-to-strength ratio
- 9, 10, 11, and 12-speed Eagle compatible

$79.99 - $139.99
absoluteBLACK Oval Direct Mount 1x Chainrings for SRAM greatly improve traction and climbing abilities. They are designed for SRAM cranks that have a 3-bolt direct mount interface and removable spider. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center).
- Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding
- The unique, patent-pending narrow-wide tooth profile keeps the chain in place
- Teeth have been 3D-machined for ultimate mud shedding and quieter operation
- Provides excellent weight-to-strength ratio
- 3mm offset is designed for 141/148 Boost spacing on standard DUB/GXP/Long Spindle BB30, as well as 157 Super Boost spacing on dedicated Super Boost DUB cranks
- Designed for GXP, DUB, and long-spindle BB30 cranks

$74.99
The Taco Bashguard is designed to protect your chainring from obstacles like logs or rocks. It is hidden behind the crank and mounted to ISCG05 tabs that are located around your bottom bracket. It offers great protection for both oval and round chainrings, especially direct mount rings that cannot mount to a standard 4-bolt bashring. The Taco Bashguard fits up to a 32T oval chainring or 34T round one.
- The Taco Bashguard can be used with any chainring from 26T-32T oval or 26T-34T round
- Box includes taco bashguard (assembled), 6 x 1mm spacers, 3 x 3mm spacers, 3x 16mm stainless bolts, and 1 x 12mm stainless bolt
- Weight: 56g

$285.00
The SL Sprint Stem is an ideal balance of stiffness and lightweight. The stem weighs in at just 1.8g per newton meter of stiffness using SRAM's Exogram technology. Designed with feedback from top pros to meet the unrelenting demands of Grand Tour sprinters. Zipp also tapped into expertise gained from its pioneering carbon stems and exhaustively researched the marketplace to create the SL Sprint Stem. The SL Sprint comes with its own stem cap that's designed to be aerodynamically efficient by blending into the stem body. Available in six sizes, ranging from 90 to 140mm, to meet any rider's fit needs.
- Updated distinctive Zipp cosmetics
- Carbon Exogram construction delivers the stiffest stem on the market gram for gram.
- Secure with four bolt faceplace using Torx T25 bolt heads
- Matte Black finish
- Lifetime warranty
- Zipp Quickview integrated computer mount available separately

$296.00
Light weight, comfort, and strength: the new SL-70 Ergo is the ultimate handlebar for long days in the saddle. The SL-70 Ergo combines the flat bar top shape of the beloved Contour SL bar with numerous modern features sought after by riders and pro bike fitters. The SL-70 Ergo sports a 70mm reach and 128mm drop. The short 70mm reach has been a popular choice in recent years, as it allows bike fitters flexibility in achieving a comfortable position without sacrificing steering control. The drop utilizes a variable radius, allowing for multiple hand positions and deeper movement into the drop. As a result, reach to the brake lever is shorter. A 3° backsweep on the flat tops keeps the wrist in a comfortable position, essential for long days on pavement or gravel, while the 10° ramp angle provides a smooth transition to modern shifter hoods. Brake and shifter housing is elegantly hidden along the underside of the bar.
- Updated distinctive Zipp cosmetics
- Unidirectional carbon built for stiffness, comfort, and light weight
- Flattened top shape with 3° backsweep for comfort
- Variable radius drop for multiple hand positions and deeper movement into the drop.
- Lifetime warranty

$60.00
Zipp’s Service Course 70 Ergo bars ensure comfort and control for every hand position, thanks to their ergonomic flat tops and easy-to-reach drops. A short reach and the revised ramp angle make the drops more accessible and comfortable. This lets you get low and aero without compromising comfort or control. Stiff for uncompromising strength, these aluminum bars are ready for anything.

$25.00 - $27.00
Zipp's Service Course Bar Tape offers excellent cushioning and a fine grip. This classy wrap is embossed with logos for a custom look and includes end plugs and finishing-tape strips.

$26.00 - $30.00
Zipp's Service Course Cyclocross Bar Tape boasts extra padding for excellent cushioning and an exceptional grip. This classy wrap is embossed with logos for a custom look and includes end plugs and finishing-tape strips.

$112.00
Zipp's Service Course SL Stem provides strength and reliability at just 120 grams. Forged of 7075 aluminum with titanium bolts, the SL is stiff enough to harness the power of your burliest sprints and withstand the jarring forces of the meanest potholes. It keeps the front end completely rigid, providing control no matter the condition.

$103.00
Zipp’s Service Course SL-80 bars keep the drops close and within reach, and because they’re angled outwards by 4 degrees, your wrists remain in a strong, natural position. This lets you get low and aero without compromising comfort or control. Zipp left the transition from the tops to the brake hoods flat so you can ride comfortably, even in a more upright position. Stiff and light for uncompromising strength and climbing prowess, these aluminum bars are ready for anything.

$79.95 - $89.95
The perfect 1x solution for your gravel, CX or road bike. Made from 7075 Aluminum, Wolf Tooth's patented Drop-Stop design helps clear mud while retaining your chain.
- Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention
- Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
- Drop-Stop FT is compatible with all 10-, 11-, and 12-speed chains (including SRAM Flattop 12-speed chains), with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Not compatible with Shimano Asymmetric 110 BCD cranks or Campagnolo CX10/11 cranks
- Use of a clutch-style rear derailleur is recommended
- Made from 7075-T6 aluminum for long life

$59.95 - $69.95
- Standard 4-bolt ring with Drop-Stop tooth design to prevent unwanted chain drop
- Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain)
- Designed and manufactured in the USA from 7075-T6 aluminum alloy
- 36g (30t)

$63.95
This 94 BCD 5 bolt ring will serve all your Vintage crankset and Surly crankset needs!
- 4 of the holes are threaded and 1 is a normal through bolt hole (done for Surly compatibility). Use a stock 10mm chainring bolt for the fifth, hidden arm.
- These rings fit any 94 BCD 5 bolt crankset
- For Plus size bike applications with the Surly OD crankset, e.g. Instigator and Krampus, you will need to use the stock spacers (Spacer Kit QBP Part number CR8609) that came with your 1x setup. You will also need some 16mm bolts from problem solvers.
- This ring will work with your vintage 94 BCD 5-bolt cranksets!!
- For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle)
- Compatible with all 10, 11, and 12 speed chains (Including SRAM Eagle)
- If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention).
- Provide a great chainline on most boost bikes.

$64.95
Designed to fit any 96 Symmetric BCD Shimano Cranksets. These rings feature the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention.
- Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention
- Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
- Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Made from 7075-T6 aluminum for long life
- Chainline is 49mm
- Chainrings are threaded for standard M8 chainring bolts for no-nut installation

$79.95
Designed to fit Shimano 4-arm 96 Asymmetric BCD XT M8000, SLX M7000, or Deore M6000 1x or 2x cranksets. These rings feature Drop-Stop tooth profiles for mud clearance, chain retention and durability.
- Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention
- Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
- Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Made from 7075 Aluminum for long life
- Use of a clutch-style rear derailleur is recommended

$19.95
- Bar end plugs are vital for any bike.
- The new Wolf Tooth Alloy Bar End Plugs feature a machined 6061-T6 aluminum end cap, a bolt, and an expandable plastic nut to comprise a lightweight, secure bar end plug option.
- Available in eight colors that match existing anodized Wolf Tooth headsets, seatpost clamps, chainring bolts, and more
- It is compatible with drop bars and MTB bars.

$94.95
- Road/Cross/Gravel offset ring has a reverse dish for perfect chainline
- Fits Cannondale Hollowgram SI & SISL cranksets, replacing ring and spider
- 48mm chainline, same as Cannondale XX1 spider. Use 10 or 11sp chain (10sp chain works on 9sp drivetrain)
- Features Drop-Stop tooth design to prevent unwanted chain drop
- Made in the USA from 7075-T6 aluminum alloy
- 64g/68g/72g (30/32/34t)

$79.00 - $89.95
- Cyclocross ring with Drop-Stop tooth design to prevent unwanted chain drop - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Designed and manufactured in the USA from 7075-T6 aluminum alloy

$76.95
The direct mount chainrings for SRAM cranksets replace your existing spider and chainring with one clean-looking, lightweight, and stiff piece of machined billet. Wolf Tooth patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability.
Compatibility
These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets, including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that the SRAM 12spd Red and Force AXS use a different 8-bolt mounting interface that is not compatible with these chainrings.
Specifications:
- Boost: 3mm offset for 52mm chainline
- Mount type: Direct Mount for SRAM
- Offset: Boost
- Chain Compatibility: Drop-Stop A tooth profile for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains

$81.95
More power? Check. Better traction? Definitely. Less shifting? Yup. Funky uneven pedal stroke? Not with Wolf Tooth PowerTrac Elliptical (PTE) chainrings. Our proprietary design means a slightly less ovalized ring (10%) with less aggressive timing (112 degree) than competitors versions; any change to your pedal stroke is unnoticeable for most riders, but they still provide the POWER and TRACTION benefits inherent to oval chainrings.
Wolf Tooth patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability.
Compatibility
- These rings fit on the Shimano XT M8000, SLX M7000, Deore M6000, or FC MT5100 1x or 2x cranksets.
- Use only the stock Shimano XT M8000 or SLX M7000 chainring bolts
- These CAN be mounted to the XTR 9000 series cranks, but you will have to use the bolt caps that come with that crankset and you will need to file roughly 1mm off the threaded boss on each bolt cap (they are a little too long and don't allow the ring to be tightened down).
- If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).
- Provide a great chainline on most boost bikes
- Must use the stock chainring bolts. The Wolf Tooth chainring bolts are a different size.
- Ovality of 10% and timing of 112 degree after TDC (top dead center)
- Maximum diameter is that of a chainring 2t bigger than the size you order so be sure there is adequate chainstay clearance.
Specifications:
- Chainline: 49mm
- Boost Crankset Chainline: 52mm
- Mount type: 96 BCD for Shimano M8000 and M7000
- Chain Compatibility: Drop-Stop A tooth profile for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains

$81.95
The direct mount chainrings for SRAM cranksets replace your existing spider and chainring with one clean-looking, lightweight, and stiff piece of machined billet. Wolf Tooth patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability.
More power? Check. Better traction? Definitely. Less shifting? Yup. Funky uneven pedal stroke? Not with Wolf Tooth PowerTrac Elliptical (PTE) chainrings. Our proprietary design means a slightly less ovalized ring (10%) with less aggressive timing (112 degree) than competitors versions; any change to your pedal stroke is unnoticeable for most riders, but they still provide the POWER and TRACTION benefits inherent to oval chainrings.
Wolf Tooth patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability.
Compatibility
These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that the SRAM 12spd Red and Force AXS use a different 8-bolt mounting interface that is not compatible with these chainrings.
Specifications:
- Boost: 3mm offset for 52mm chainline
- Mount type: Direct Mount for SRAM
- Offset: Boost
- Chain Compatibility: Drop-Stop A tooth profile for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains

$69.95 - $81.95
Designed for Race Face CINCH cranks with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention.
- Elliptical chainring shape provides better efficiency in the recovery zone, as well as increased traction thanks to consistent torque
- Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
- Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Made from 7075-T6 aluminum for long life
- Use of a clutch-style rear derailleur is recommended
- 52mm chainline / 3mm offset for boost spacing
Page 1 of 276
Next page